THA Posted February 5, 2016 Share Posted February 5, 2016 For while I thought how to attach a trolley handle, telescope type, to my Lhotz. Wasn't so sure about it's offroad safety and a bit worried it would touch my toes/shoes. Finally a got the idea: I had a badly bent old shcool 7/8" Renthal so I took the crossbar and brackets, some aluminium plate and a lot of sides. I fitted crossbar bracket around Lhotz 20mm SS handle, machined an aluminium plate for indexing, bent crossbar down to Lhotz front end, machined a piece of handlebar to attach it to the opposite end of crossbar. There is abs. too much free play / loose fittings, but despite of 1-2 cm play in both ways, this works. I already tested, I can push or pull the wheel even in stairs. On flat pushing is way more easier. Now I have trolley handle in my dual sport wheel - makes it true dual sport Link to comment Share on other sites More sharing options...
Tomek Posted February 5, 2016 Share Posted February 5, 2016 cool, i have a similar plan for my mcm4 when it arrives, also very similar to the inmotion v5 handle Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.