Jump to content

Recommended Posts

2 minutes ago, Sergey Sh. said:

I had the same thing. At first I got some strong wobbles while braking from speeds over 60kph(37mph), it was very difficult to deal with it, then I moved the pedals to the lower position and lowered the pressure to 26psi, and eventually the wobbling stopped. It is necessary to gradually work out the braking at higher and higher speeds. My weight is 75 kg (165 lbs) so low pressure suits me better. I also found the settings that were convenient for me. This is now Fancier, Commuting mode, 56 percent pedal sensitivity.

Thanks for this info! I may adjust some of the settings i am using to check out commuting mode.. I have been on offroad with about 60% sensitivity. It has been pretty good, but should probably check out the softer mode too

Link to post
Share on other sites
  • Replies 571
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Popular Posts

Update. Ewheels was extremely responsive per usual. They believe there is an issue with the controller on my wheel. Not sure what component that is or how that could happen.  Regardless, I s

Since first batch and not many out there, thought I would offer V12 first impressions. Very early days with just unboxing and one short 6-mile ride today. For reference, I am coming from 16x. Sho

I'd like to inform Inmotion V12 owners that recently released EUC World 2.8.0 update includes almost complete support for this wheel. https://euc.world/blog/euc-world-2-8-0-has-been-released/

Posted Images

My replacement wheel arrived yesterday. It rides alot like the V11, but maybe a bit quicker off the line and weaker breaking. Although I'm still dialing in my breaking technique. Reached 63kmph today(didn't realize it until after the ride) and breaking was little sketchy. 

With that being said I think the split mode will really help. 

I miss suspension for sure, but I like that speed/power safety margin on the V12. 

Edited by Chaotropic
Spelling error
Link to post
Share on other sites
45 minutes ago, Chaotropic said:

My replacement wheel arrived yesterday. It rides alot like the V11, but maybe a bit quicker off the line and weaker breaking. Although I'm still dialing in my breaking technique. Reached 63kmph today(didn't realize it until after the ride) and breaking was little sketchy. 

With that being said I think the split mode will really help. 

I miss suspension for sure, but I like that speed/power safety margin on the V12. 

Wait, whaaa-- there are people riding in York, PA!? Small world. (I grew up near there.)

Maybe I can poke you the next time I'm home visiting family to rent/borrow a wheel for a few hours to show them 'what I do'. :)

Link to post
Share on other sites
5 hours ago, Sergey Sh. said:

I moved the pedals to the lower position

I’m in the middle position now, and like it more then the lower setting. The wheel is top heavy, and I’m thinking I’m more centered to the weight of the wheel. I have to figure out the Physics of this.. I went from 38 psi, to 31psi, this obviously helped ( 165lbs)

Link to post
Share on other sites
58 minutes ago, lirva said:

Is it possible to get white light in the front and red in the back in V12?

I think it is possible to make the lights white, but the back will turn red when you brake. Not sure if you can make the front and rear separate colors. I can try it later for you and report back

Link to post
Share on other sites
12 minutes ago, Mike Roe said:

It appears there is a new firmware update for the v12 this morning.    Don’t have a good day, have a great day! 

Bummer i still can't see it in my app

Link to post
Share on other sites

I turned the inmotion app on and it said firmware available. 

 

latest update version of the inmotion app maybe? Or maybe since mine was manually pushed for the last one, they just have it on a list or something. 

Link to post
Share on other sites
3 minutes ago, Mike Roe said:

I turned the inmotion app on and it said firmware available. 

 

latest update version of the inmotion app maybe? Or maybe since mine was manually pushed for the last one, they just have it on a list or something. 

Yeah I think you may have been  lucky enough to get it manually pushed. I am still waiting for a response from them. I did contact ewheels, they said they responded to them and asked for my info. But so far no such luck! I am kind of annoyed but am trying to practice patience in my older age. :-)

The truth is the wheel is obviously ridable with its currently much lower firmware, but i would really love to at the very least get the features i paid for. Pre-release testing had newer firmware than what shipped on these v12's. I have to believe there are some improvements that come with the firmware updates. 

Link to post
Share on other sites
3 hours ago, jimjam.nyc said:

 I can try it later for you and report back

Maybe i'll try myself also. Got the wheel but didn't find white light straigh away.

Edited by lirva
Link to post
Share on other sites
11 minutes ago, lirva said:

Maybe i'll try myself also. Got the wheel but didn't find white light straigh away.

I think there is a color picker option all the way on the right in the color palette. You can then pick your colors there and add them to the color list.

Link to post
Share on other sites
4 minutes ago, jimjam.nyc said:

I think there is a color picker option all the way on the right in the color palette.

Yep found it, now it's perfect.

Link to post
Share on other sites

Can someone confirm the speed alarms work? There’s two points on a slider on the wheel’s screen… I turned them all the way down and there’s no alarm sound for me.

 

Link to post
Share on other sites
27 minutes ago, Mrd777 said:

Can someone confirm the speed alarms work? There’s two points on a slider on the wheel’s screen… I turned them all the way down and there’s no alarm sound for me.

 

The alarm was not working for me on the original firmware.  The updated firmware it worked. 

Link to post
Share on other sites

Firmware upgrade available, updating now...  lets see if split mode can help.. I have to say that the V12 exudes quality! (so far)

Link to post
Share on other sites
11 minutes ago, Mrd777 said:

Firmware upgrade available, updating now...  lets see if split mode can help.. I have to say that the V12 exudes quality! (so far)

I am happy some of us can get this going.. I am still struggling to get the update!

Link to post
Share on other sites

I don't have it either. Quality is great and first rides in pouring rain done.

My V12 tours are not visible in Euc.World log files are there but no visualisation. I was eager to compare my usual offroad route between V12 and MSP

Link to post
Share on other sites
On 8/19/2021 at 9:02 AM, Mrd777 said:

Firmware upgrade available, updating now...  lets see if split mode can help.. I have to say that the V12 exudes quality! (so far)

Did this update just rollout to you, or did you need to inquire with distributor to have them push the firmware update out? (wondering if I should just wait patiently, or if there is need to request)

Update: I did reach out to Ewheels and they sent my info over to Inmotion on Friday. Will see if comes through.

Edited by GPW
Update
Link to post
Share on other sites
9 minutes ago, Mike Roe said:

Are you guys using the inmotion app for upgrades?  Stupid question maybe. 

well i am using the inmotion app. but inmotion is aware of the issue. 

I had to contact ewheels.. i even contacted inmotion service directly.. Its been a royal pain so far.. 

Inmotion service took 2-3 days to get back to me.. they said they pushed the firmware upgrade to me and it never showed. 

Ewheels has asked me for my logon name multiple times to send to them and still no dice. The time difference i am sure doesnt help. 

IF this firmware wasn't missing basic features i wouldnt be so impaitent.. Also reading others here have gotten updated leaves me with fomo :-( hehehe

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...