Popular Post Julianjc84 Posted July 16, 2021 Popular Post Share Posted July 16, 2021 (edited) I made a wooden stand for the KingSong S18 with the owner of the S18. Introducing; the Julian Stand Made from scrap pallets Very solid and sturdy. Will support a V11 leaning next to it no problem Ramp to ride the S18 up and drop down onto the wooden holders. At the peak of the ramp you push the trolley handle into the carry position to disengage the wheel. Otherwise it will fast free spin the wheel when it lands on the stand as there is clearance to the ground. Future updates will angle cut the front holders to tip the EUC forward to slide off the stand and engage the wheel. Edited July 17, 2021 by Julianjc84 8 Quote Link to comment Share on other sites More sharing options...
UniBlab Posted July 16, 2021 Share Posted July 16, 2021 I like the Julian Stand - I will make one with your blessing! 1 Quote Link to comment Share on other sites More sharing options...
OldFartRides Posted December 5, 2021 Share Posted December 5, 2021 Another s18 wooden stand. Just some scraps I had on hand. Three pieces. Two chunks of 2x8, one 2x4 with a 1/2 divot gouged out. Works surprisingly well. 2 Quote Link to comment Share on other sites More sharing options...
Kristof Willen Posted December 14, 2021 Share Posted December 14, 2021 On 7/16/2021 at 2:57 PM, Julianjc84 said: Whoa, that knobby V11 tire looks quite impressive, almost mistook the wheel for a Z10 ! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.