Jump to content

Lowest voltage for MSP HS (C30)

Recommended Posts

5 minutes ago, sffish said:

For the MSP HS, what's the shutoff voltage? What voltage corresponds with 0% battery? On eucworld when the MSP is at 89V it's showing 56% battery. Is that correct?

The msp hs is a 100V wheel - so it has 24 li.ion cells in series.

89V / 24 ~ 3.7V which is more or less nominal voltage ~50% state of charge, as euc world states.

GW discharged "historicly" down to 3.3V per cell, so 79.2V for 24 cells.

Many/some? manufacturers switched to discharge downto 3.15V - don't know if GW did too?

Btw: EUC World has two modes for charge % - the classical as used by the wheel with some 4.1xV beeing 100% and the 3.3V or 3.15V per cell beeing 0%.

The new is adopted better to li.ion cells and should show more realistic state of charge.

  • Like 2
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Create New...