Harbor Freight Pedal Mod

[Pev junkie 11]

So I did a pedal grip mod that has been working out great so far. Started out with this anti slip mat from Harbor Freight. Cut rough size out and applied to pedals, then cut around pedals. Best part is only about $4 with coupon.  I have not tested out how well they work when wet too much. I did spill a little water on them but it beads off pretty quick. It feels really good when standing on it. Let me know if you have any questions or try it out! 🤙

[Heinzmoleman 0]

Is the bottom of these mats sticky? Or did you use glue?

[Pev junkie 11]

On 1/12/2021 at 8:06 PM, Heinzmoleman said:

Is the bottom of these mats sticky? Or did you use glue?

It had a sticky back already on it. Since I posted this, one side was not sticking good. I removed it and removed the sticky backing. I then used contact cement to reinstall it. It has been fine since. 

[newbie101 57]

On 12/30/2020 at 7:00 PM, Pev junkie said:

So I did a pedal grip mod that has been working out great so far. Started out with this anti slip mat from Harbor Freight. Cut rough size out and applied to pedals, then cut around pedals. Best part is only about $4 with coupon.  I have not tested out how well they work when wet too much. I did spill a little water on them but it beads off pretty quick. It feels really good when standing on it. Let me know if you have any questions or try it out! 🤙

Maybe you want to try mud if it works? if not, wondering if you can add some hex screw as spikes.

Edited January 16 by newbie101

[Pev junkie 11]

On 1/15/2021 at 11:35 PM, newbie101 said:

Maybe you want to try mud if it works? if not, wondering if you can add some hex screw as spikes.

I haven't got wet mud on them but I do ride trails and so far dirt hasn't been an issue.