HighBoy Posted November 13, 2020 Share Posted November 13, 2020 I am trying to program a new remote to my Airwheel A3 unicycle, can't figure it out, anyone out there can tell me how. Thanks Quote Link to comment Share on other sites More sharing options...
talisman Posted September 13, 2022 Share Posted September 13, 2022 Well to pair unit remove both fenders then remove fender base brackets that exposes the rear accsess hatch remove that to open Main enclosure. Now make sure your remote has fresh battery A3 12 volt Centrally there are 2 computer boards , on the lower board there Is a bluetooth /encryption reset Button Press that and a red led will lightup Hold it down till it goes out Now press that same button 2 seconds and press remote a button hold it down till it flashes and thats it. Its a very small space between the boards a pinky works ...hope this helps. Quote Link to comment Share on other sites More sharing options...
Jessica57 Posted November 4, 2022 Share Posted November 4, 2022 Talisman, Can you explain it a little further. I tried what you suggested to pair my new remote with the A3, but even though the LED lights acted as you said they would, it still didn’t work. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.