Jpd Posted April 13, 2020 Share Posted April 13, 2020 I recently acquired an 84v Nikola which has the old board in it. I ordered the upgraded board from ewheels but, it has an xt60 connector instead of the xt90 that comes from the batteries. I ordered an xt90 to xt60 adapter from amazon as to avoid soldering. Will this affect anything, like allowing too much current into the board? Quote Link to comment Share on other sites More sharing options...
RAFAL M Posted April 28, 2020 Share Posted April 28, 2020 (edited) Hi Guys! This is latest 2020 motherboard All bottom line sockets are totally redesigned comparing to my old 2019 motherboard which I'm trying to change now Please help guys as I have no diagram for the new motherboard. Only sockets on the right like hall sensor(white), lift off switch(purple) and light belt(white) I have correctly plugged in, the rest is one big question... -------------------------------------------------------------------------- All done ! Nikola ready for testing. Here is the missing information for future users who might be dealing with latest motherboard for MSX or Nikola hope this will help somebody Sockets brown (bluetooth speaker power supply) and orange (music on signal) left empty. Good luck! Edited April 28, 2020 by RAFAL M 2 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.