hoonetic Posted October 6, 2019 Share Posted October 6, 2019 Hi guys! I have an ACM16 that I haven’t used in a few months, so when I plugged the charger to the outlet everything seems fine. LED light was on and when I plugged the charging port to the EUC I heard a pop and it tripped a breaker switch. The LED was off but when I unplugged the cable from the EUC the light came on. Not sure where to start. Anyone heard of this issue before? Thanks! Quote Link to comment Share on other sites More sharing options...
meepmeepmayer Posted October 6, 2019 Share Posted October 6, 2019 Does the wheel work? I think most likely the charger just died. Quote Link to comment Share on other sites More sharing options...
hoonetic Posted October 7, 2019 Author Share Posted October 7, 2019 23 hours ago, meepmeepmayer said: Does the wheel work? I think most likely the charger just died. The wheel's battery is totally dead that's why I was going to charge it up but the charger is not letting me charge it. When I try to charge it using an outlet that has a built-in breaker, It trips the breaker immediately and makes a popping noise, and the green LED turns off as soon as I connect the charger to the wheel. So I tried in another outlet without a built-in breaker in the outlet and when I plug the charger it makes the popping sound again and the green LED turns off, BUT when I unplug the charger from the wheel, the green LED comes on, so it wasn't tripping the main breaker switch in my garage. I'm hopping it's not the battery but it could be anything that might be shorted inside which is making the popping noise. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.