Jump to content

Quick Connect Inflation adapter?

Recommended Posts

I have some experience with having to re-inflate tires from my 16S and 18L riding. However, this 18L valve seems especially tight against the rim, making it impossible to use my old valve extension that I used to use on my previous 18L tube valve and my 16S tubes. I even ordered an adapter that has a smaller screw  on form factor that is still tight to get on and takes a sec to unscrew. So, my 42 psi turns into 35 psi by the time I get it off. It usually only takes me 10-15 seconds to inflate my tire, so it seems like a waste to screw something on the valve and unscrew it.

I notice I can use my tire gauge easily with it's press-on connection to check the pressure. So, it seems logical there must be a quick connect adapter I could use, even for this small electric inflator I have. Something like a large air compressor press on , quick connect is what I want. But I can't seem to find it. 

Does anyone know if there is an adapter like this? If so, it will make things a lot easier!

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Create New...