Jump to content

Gotway Mten3 Tubeless Conversion


Recommended Posts

Here's a long form video where I show how I converted my original Mten3 to a tubeless wheel, and I repainted it for a new look.

 

Link to comment
Share on other sites

7 minutes ago, LucasD said:

Cool looking!

What kind of paint did you use?

What about tyre pressure you run the same as with tube?

Thanks.

RUST-OLEAM 2X Ultra Cover spray paint.

I'm running with the same pressure (~35+) and it rides just like it did with the tube.

Link to comment
Share on other sites

23 minutes ago, Robert Jackson said:

Marty, 

Thanks for the great video and information. I'm assuming the Mten3 tire from Green Fashion requires a tube:

Green Fashion Mten3 Tires

This is the one you installed right:

Xiaomi Mini Scooter Tyres 70/65-6.5 Tubeless

As far as I know every new Mten3 is already tubeless.

Still there is recommendation that other type of tyre might be better...

Link to comment
Share on other sites

2 hours ago, Robert Jackson said:

Marty, 

Thanks for the great video and information. I'm assuming the Mten3 tire from Green Fashion requires a tube:

Green Fashion Mten3 Tires

This is the one you installed right:

Xiaomi Mini Scooter Tyres 70/65-6.5 Tubeless

The link to that tire is correct. It's the tire on the right. The left one is what comes on the Mten3.

Only the first Mten3's had tubes. Unless you happen to get extremely old stock, it comes without a tube.

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...