Jump to content

Recommended Posts

Posted (edited)
5 hours ago, kamadella said:

the strange thing... in the website there are all my csv files but no tours...

Let me try to shed some light on how logs and tours work currently.

It is not anymore possible to create Tours from Logs in euc.world. Fullstop.

If you want a Tour in euc.world you must activate the tour recording from the app when you ride. If you don't want to use  your cell phone data, there's a setting called Use WiFi only: your Tour will be uploaded when you get home.

The Logs are a different story. I am quite sure that you don't need to have logging active to successfully record/upload a Tour (I cannot try because my wheel is on a slow boat between Japan and Spain), if I am right then I would really only activate logging in case you want to make some extra analysis in Excel.

As @Seba clarified, what many people was using (ride with logging active, get home, go to euc.world and transform the Log into a Tour) was a temporary workaround which does not exist anymore. It is not needed, since you can basically record the Tour in the app and upload it later (with the setting mentioned above). 

Edited by Coco66

Share this post


Link to post
Share on other sites
Posted (edited)
23 hours ago, Seba said:

Privacy zones are under development. While it may seem trivial, from technical point of view it's more complicated. Now I'm testing several approaches to this feature and hope to add this feature this autumn.

Don't worry and do it at your own pace :). I've been a programmer and I know how easy it is to ask, haha :whistling:.

It is complicated to implement it, I imagine, but an idea that surely has already occurred to you:
- The user chooses their "private" points (home, work, ..) by clicking on a map and the privacy radius (example: 2 km)
- The app calculates the distance to these points, for example, every 30 s (in order to not saturate resources). This can be done with the Haversine formula, which you surely know https://www.techwalla.com/articles/the-haversine-equation-in-excel. I would not know how to pass it to Kotlin, but I do not think it is complicated (typical phrase of the one who asks but does not do;)) . Edit: maybe is this: https://gist.github.com/jferrao/cb44d09da234698a7feee68ca895f491
- If the distance is less, the capture of that point is ignored and it is not shown on the public track

Logically, if someone sets a radius too small, the private location of that "circle" can be roughly deduced if there are many public tracks. If the radius is large, it is more difficult, but if we put a random factor (for example + - 1km) it will be complicated.

It is for contributing possible ideas.

BTW: I am a newbie rider (only 500 km). After testing it well, the app works perfectly on my V10F and with my mobile Xiaomi Mi 9 (MIUI 12), in case it serves as a reference. And I'm meticulous looking for bugs (especially from other people's and not mine, haha). So I have made an initial contribution of 20 euros, something that seems fair to me for what you enjoy with your app (90.31 PLN sounds like more money haha). I encourage other users to contribute with something, as I find it an impressive job and very useful for the community. It generates peace of mind and that is worth much more than this contribution. And thanks :) 

Edit: By the way, I see that the registration is immediate and I'm already a premium user. I thought you had to wait. Impressive management :efefae4566:. I'm going to show it to my grandmother, who always said that I didn't get any awards :D

Edited by Halig

Share this post


Link to post
Share on other sites
Posted (edited)
On 10/1/2020 at 10:46 AM, Seba said:

It's normal. There can be only one connection active at a time. If you start one app, as long as it's running no other app can connect to the wheel. If you start Inmotion app, it will block BT connection for EUC World as well.

At least in my mobile is possible and I just checked again. By opening Inmotion app and then EUC World, you can have both working. If the sequence is done in reverse, no. It is not important, but it may be interesting for someone else to have both apps open (for now, to see that instant consumption that or the consumption graph gives the official app). Forget it, it's a freaky; I was more curiousity. Here I have put it in split screen when riding this morning

Screenshot-02-10-2020-17-30-43.jpg

Edited by Halig

Share this post


Link to post
Share on other sites
Posted (edited)

Is it possible to configure the automatic lighting of the light when we open the app?. I think it would be interesting. Ligh uses little battery and is a free security element and thus we save that time of turning it on every time. I'm reading the whole thread and I saw that it was implemented for GW and KS :)  but not Inmotion :innocent1:

Of course, is activated the "Switch on the light", but, at least in my V10F it doesn't work and I have to turn it on manually with the button or deactivate and activate that option (but when restarting the app, it forgets about that activated configuration)

Edited by Halig

Share this post


Link to post
Share on other sites

Another issue: the option to change the battery algorithm and battery levels is disabled.

I have tried turning on / off CSV and/or tour log, but it is still grayed out. How can I activate it?

Share this post


Link to post
Share on other sites
27 minutes ago, Halig said:

I have tried turning on / off CSV and/or tour log, but it is still grayed out. How can I activate it?

Connect to the wheel.

Share this post


Link to post
Share on other sites
4 hours ago, Halig said:

Another issue: the option to change the battery algorithm and battery levels is disabled.

I have tried turning on / off CSV and/or tour log, but it is still grayed out. How can I activate it?

The wheel also needs to be connected

Share this post


Link to post
Share on other sites
Posted (edited)

Hi, 

Euc worlds returns me a min battery of 46%. However this time i recorded a tour and on the graph for the battery curve, its never below 90%. Anyone know which one is right and why this difference of values? Maybe @Seba can advise? Thanks 

Edited by Ronin Ryder

Share this post


Link to post
Share on other sites

@Seba can't see my tours anymore, plus a weird bug leading up to it happening.

Some background, I tried turning on the lights on my V10F via hold function on my galaxy watch while riding on a tour, it shows lights symbol but then all EUC world hangs, galaxy watch shows gray speedometer and on the phone all the indicators are white color and not responsive, have to close the EUC World app, force stop it and restart it to make it working again, this naturally lead to it to not stopping the previous tour properly and creating a fresh tour.

Share this post


Link to post
Share on other sites
22 hours ago, Planemo said:

Connect to the wheel.

 

17 hours ago, travsformation said:

The wheel also needs to be connected

Thanks for the idea :efeec46606:, but the problem occurs being connected as well (I hadn't said it). Today I have tried it again with all the combinations that come to mind and those options to change the algorithm and customize battery levels are always grayed out. Maybe it's a problem with my V10F or something I'm forgetting :innocent1:

On the other hand, I comment that I have activated "Battery level averaging" and that I had also tried connected and disconnected

Share this post


Link to post
Share on other sites
6 minutes ago, Halig said:

options to change the algorithm and customize battery levels are always grayed out

Make sure the wheel is connected and CSV logging is stopped. 

Share this post


Link to post
Share on other sites
8 minutes ago, Paradox said:

Make sure the wheel is connected and CSV logging is stopped. 

I just checked again that combination that you are telling me but it is still grayed out both battery level setting options. Anyway I appreciate your idea :) 

Share this post


Link to post
Share on other sites

The struggle is real. Swipe the screen and press the stop symbol for the tour.

You can't change battery settings in the middle of an active tour.

Share this post


Link to post
Share on other sites
On 4/2/2020 at 12:32 PM, Seba said:

There is special custom action - "Enforce regulatory compliance". You can for example use it with Flic 2 button. When needed, you need to press Flic and your wheel is limited to 20 km/h.

Is it possible to change that legal limit from 20 km/h to 25?  (There are several countries where the limit is 25 https://www.vpe.es/paises)

Share this post


Link to post
Share on other sites
15 hours ago, Halig said:

 

Thanks for the idea :efeec46606:, but the problem occurs being connected as well (I hadn't said it). Today I have tried it again with all the combinations that come to mind and those options to change the algorithm and customize battery levels are always grayed out. Maybe it's a problem with my V10F or something I'm forgetting :innocent1:

On the other hand, I comment that I have activated "Battery level averaging" and that I had also tried connected and disconnected

Inmotion wheels are directly reporting battery levels, so EUC World doesn't calculate it on its own. Value displayed is value received from wheel.

Share this post


Link to post
Share on other sites
4 hours ago, Finn Bjerke said:

Inmotion + EUC world = impressive.

Well done Seba. Its totally worth the money..... Now you lot bloody well subsribe to the app and pay the man.

Thanks :) Within next few dats I will release another update that will support V11 even better :) 

Share this post


Link to post
Share on other sites
Posted (edited)
On 4/10/2020 at 8:33, Seba said:

Inmotion wheels are directly reporting battery levels, so EUC World doesn't calculate it on its own. Value displayed is value received from wheel.

Sorry, but surely I have explained myself wrong.  My question is: how can I change the battery algorithm options (or the other option to customize the levels) ?.  They are always greyed out with my V10F.  I am connected to the wheel and deactivated CSV and tour (although I have also tried other combinations).  It was one of the reasons for going premium, thinking that they were blocked because of it, but I see that not.

Edit: I guess the answer to question is that my V10F does not support the activation of that optimized battery% or changes in the algorithm and that is why it is always grayed out.  Although, if so, I don't understand why.  Inmotion gives the data of the battery%, ok, but the app could make the adjustments it wants to show another custom battery%.  For example, I have noticed that in low battery%, the data that Inmotion V10F gives is too optimistic and there is less than what it indicates (it happens as in the Xiaomi m365, although less exaggerated)

Edited by Halig

Share this post


Link to post
Share on other sites

@Seba still can't see my recorded tours, anything I can do myself to remedy that?

Share this post


Link to post
Share on other sites
15 minutes ago, Rawnei said:

@Seba still can't see my recorded tours, anything I can do myself to remedy that?

Does your last tour show on map in EUC World app?

Share this post


Link to post
Share on other sites
8 minutes ago, Seba said:

Does your last tour show on map in EUC World app?

Yes it does

Share this post


Link to post
Share on other sites
2 minutes ago, Rawnei said:

Yes it does

Ok, so please contact me via email - sebastian@euc.world - I'll try to help you.

Share this post


Link to post
Share on other sites
Posted (edited)
On 9/30/2020 at 8:56 PM, travsformation said:

It shouldn't be a big change that you can't cope with 😉 

Go to the last screen and hit the "play" icon. Hit "stop" or just close the app when you're done. Open the app when at home and connected to WiFi for the tour to be uploaded to the server. Why you'd resist that when you're capable of using EUC World telemetry in your videos (something I see as too tedious to even bother with) is beyond me 😜

And about the Sherman, I think subsequent tours where you're more familiar and comfortable with the wheel will yield much more interesting data so don't be discouraged. My maiden trip on the 16X involved 10km at 20 km/h, unlocking the top speed, riding 3km,dislocating my shoulder and not being able to ride for several months 😅

Moral of the story: you have a Sherman and you can ride it. The rest is irrelevant 😁

I got a tour to work. Your first sentence is wrong tho. It IS a change I can't cope with. Having the wheel connected and hitting a single icon on the main screen I wish to stay on, was the perfect solution. NOW, I must swipe around, chase another icon, swipe back and start live tours AND csv? Yes it works, but sadly the effort has crossed beyond the amount of intrusion and hasstle I find it's worth. Great app of course, but with progress came change. With change comes complexity. With complexity comes more required user action. Nope, no thanks. Oh well, I'll still use it as a speedometer, but i fear my tour stats and record have just come to an end. Unless we can get a way to have a single icon to get the tours started on the main page (as it was before), I'll be moving on. Just a personal thing, nothing against the app or dev at all.

Edited by ShanesPlanet

Share this post


Link to post
Share on other sites
12 minutes ago, ShanesPlanet said:

Having the wheel connected and hitting a single icon on the main screen I wish to stay on, was the perfect solution. NOW, I must swipe around, chase another icon, swipe back and start live tours AND csv? Yes it works, but sadly the effort has crossed beyond the amount of intrusion and hasstle I find it's worth.

Hey @ShanesPlanet you can bypass all that clicking on icons and swiping screens if you change your settings so that CSV logging starts automatically when the wheel connects to EUC World and also for Tours to start automatically when the wheel connects to EUC World.  If you also select: "Upload logs" and "Use Wi-Fi only" in log settings then your data will not be used and Tours then get automatically uploaded once you get back to your home wi-fi network. 

I can understand that if you were to go through the whole process you describe that it would be a pain and off-putting, but it can easily be simplified in the settings to the point where you just fire up EUC World and it's all done for you!

Share this post


Link to post
Share on other sites
Posted (edited)
8 minutes ago, fbhb said:

Hey @ShanesPlanet you can bypass all that clicking on icons and swiping screens if you change your settings so that CSV logging starts automatically when the wheel connects to EUC World and also for Tours to start automatically when the wheel connects to EUC World.  If you also select: "Upload logs" and "Use Wi-Fi only" in log settings then your data will not be used and Tours then get automatically uploaded once you get back to your home wi-fi network. 

I can understand that if you were to go through the whole process you describe that it would be a pain and off-putting, but it can easily be simplified in the settings to the point where you just fire up EUC World and it's all done for you!

good catch and yeah, thats an option. I just don't want anything to start automatically. My tour did the same as usual, in the fact that it uploaded once I got near wifi and turned eucw on/off. I find that if i turn it on/off, i neednt fuss with loggin in, as it does it for me. As it is, my wheel is typically connected for a while, until I ensure gps is even logging. The simplest solution was the single button to turn it all on and the same to turn it ALL off, while on the only screen I bother with. Hell, I could ride a while, reach down and start logging while I smoke a cigarette, hold a gopro and unsafely fly down the street. That damn camera icon on the bottom is somewhat frustrating too, as it takes the perfect touch to get it to go away and an imperfect touch to bring it back to clutter. Now I have to hit more screens and even confirm my actions once I do them.Thank you for the workaround, but I was once spoiled and now anything less would be uncivilized. :)

Edited by ShanesPlanet

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


×
×
  • Create New...