Jump to content
Gaz Bon

V10F First impression

Recommended Posts

Well im getting to like this wheel the more I ride it

Tyre pressure now 30 psi

Range is a little disappointing 🤔 at 35 KMs but riding the wheel pretty hard and at lower tyre pressure 

Seriously can not do range testing it far too tedious staying at  one speed for entire Batt charge ,hats off to people who do 🤠

Still not liking the annoying 😤 speed notification from the speaker's but tilt back is fine

Cut down the handle 20 mm so you can see the full rear light when riding 

Grip tape added to pedals as feet getting bounced off when bumpy terrain encountered 

  • Like 1

Share this post


Link to post
Share on other sites

Awesome thanks for this.
I have been looking at the V10f for the same reason (having an in between wheel) but I think i'll put 1000km on my new MSX first and then see.

Share this post


Link to post
Share on other sites
On 1/31/2019 at 10:51 PM, Mike Sacristan said:

Awesome thanks for this.
I have been looking at the V10f for the same reason (having an in between wheel) but I think i'll put 1000km on my new MSX first and then see.

The KMS will soon fly by on the MSX and its a strange transaction going down in power and speed  to the V10F.

But that being said I really do like the V10F just getting adjusted to a different wheel 

I would like the MSX angled pedals on this machine just for a bit more clearance ,turning and trial riding but still adjusting 😌

So got 40 KMs on a range test 60℅ off road 

Temp 32 Deg

Wind minimal 

Avg speed 25kph 

Battery 7% loaded 16% when stopped 

 

  • Like 1

Share this post


Link to post
Share on other sites
On 1/31/2019 at 1:42 PM, Gaz Bon said:

Still not liking the annoying 😤 speed notification from the speaker's but tilt back is fine

You can change or delete this horrible siren using the app. Go to sound settings and try to find out which Chinese text is for this sound. Record silence for a second and do the transfer as with lights. It is very buggy but worth the effort. Enjoy the silence!

If you use iOS download DarknessBot and change speed limit to 45 km/h. On Android there might be another app for that. 

  • Like 2

Share this post


Link to post
Share on other sites

@UniVehje is it possible to change the atmospheric lights through the Inmotion App? For some reason, it doesn't function at all. 

A friend of mine wants to change the colour to something similar as in the picture below.

Screenshot_20190203-105317.png

Share this post


Link to post
Share on other sites
9 hours ago, ED209 said:

@UniVehje is it possible to change the atmospheric lights through the Inmotion App? For some reason, it doesn't function at all. 

A friend of mine wants to change the colour to something similar as in the picture below.

 

Yes it is. But for the transfer the wheel must fisrt be placed on the resting position. Just like when updating firmware or doing body calibration. 

https://www.inmotionworld.com/blog/what-is-zero-offset-calibration-of-inmotion-unicycle

  • Like 1

Share this post


Link to post
Share on other sites

I often can’t connect my app to the V10 (even though it always connects for music) to view information or change settings. It often says, ‘you cannot ride’ here (even when I’m at home or out on a normal road). Has anyone else experienced this or got a workaround? The V10 is my first wheel and I’m addicted ;)

Share this post


Link to post
Share on other sites
19 hours ago, RogerU said:

I often can’t connect my app to the V10 (even though it always connects for music) to view information or change settings. It often says, ‘you cannot ride’ here (even when I’m at home or out on a normal road). Has anyone else experienced this or got a workaround? The V10 is my first wheel and I’m addicted ;)

Cant say i have had that problem but sometimes it does get confused if other bluetooth devices around which my phone has had previous connections and wont connect 

Share this post


Link to post
Share on other sites

Well today did my 1st continuous Km ride going backwards on the V10F

It kinda gets a bit disorientating going backwards for that long doing many Fig 8s and circles 

But getting very comfortable going backwards  

  • Like 3

Share this post


Link to post
Share on other sites
On 2/3/2019 at 8:48 PM, UniVehje said:

Yes it is. But for the transfer the wheel must fisrt be placed on the resting position. Just like when updating firmware or doing body calibration. 

https://www.inmotionworld.com/blog/what-is-zero-offset-calibration-of-inmotion-unicycle

Thanks, how do you restore the atmospheric lights to the original display?  It isn't on the display list. 

Edited by ED209

Share this post


Link to post
Share on other sites
5 hours ago, ED209 said:

It isn't on the display list

I'm pretty sure it's one of the listed pre-made animations. You might be able to delete them, though. 

  • Like 1

Share this post


Link to post
Share on other sites
19 minutes ago, UniVehje said:

I'm pretty sure it's one of the listed pre-made animations. You might be able to delete them, though. 

Thanks, your advice has been very helpful! 

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×