Alex210210 Posted December 22, 2018 Share Posted December 22, 2018 Dear All, Please help me find a solution for my InMotion V10 problem. It enters in a trepidation mode each time I try to move it by the handle and also when riding it on low speeds (like when turning and starting the ride) I contacted also In motion service but I dind not revive any reply (except the automatic reply) See link of the video https://youtu.be/GbhRueyOMSo Thank you and relay apreciate any feedback and solution! InMotion V10 trepidation problem.3gp Link to comment Share on other sites More sharing options...
Marty Backe Posted December 22, 2018 Share Posted December 22, 2018 I just saw very similar symptoms on a MCM4 (I think that was the wheel). In that case the problem was one of the 3 motor wires had become disconnected. Link to comment Share on other sites More sharing options...
Lincy Posted December 24, 2018 Share Posted December 24, 2018 @Alex210210Hi Alex, it seems that the motor shaft link is loose and needs to be tightened. Kindly send an email to me, I will tell you how to do. My email: lincy@imscv.com Link to comment Share on other sites More sharing options...
Robson Chikasawa Posted January 29, 2019 Share Posted January 29, 2019 @Alex210210, your problem was resolved with solution @Lincy mentioned above? Link to comment Share on other sites More sharing options...
Alex210210 Posted April 14, 2019 Author Share Posted April 14, 2019 On 12/24/2018 at 11:32 AM, Lincy said: @Alex210210Hi Alex, it seems that the motor shaft link is loose and needs to be tightened. Kindly send an email to me, I will tell you how to do. My email: lincy@imscv.com Thank you for the solution. The screws fixing the pedal suport on the wheel axle where lose due to vibration. I replaced them and added Steel Serrated Lock Washer on each side and used Elastic Stop Nut just to make sure will not get loose again due to vibrations. Problem.mp4 Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.