Marty Backe Posted September 23, 2018 Share Posted September 23, 2018 Here's a video of the installation of @EUC GUY's 'power' sidepads for the MSX. Link to comment Share on other sites More sharing options...
Electroman Posted September 23, 2018 Share Posted September 23, 2018 Good stuff Marty, mine looks exactly the same, also picked the black plastics under the dark grey, looks very nice indeed. First few hours I actually did not like the side pads at all, they build some thickness where I initially thought the MSX width was spot on for me, I also like to have my feet all the way into the sides of the MSX, to a degree where some of the weight actually even end up over the pedal arm should something happen to a pedal? Besides I keep close anyway, aggressive rider and use a lot of input, manipulation of the wheel but applying pressure at certain points and standing free from the body does not fit my style unless at times where I ride very soft of course. Also expected the side pads to be soft'ish like on the ACM which I find very comfy in that regard, these are much harder and lack the soft to the touch feeling I get when thinking of neoprene, but hey I adjusted fast and now I am very glad EUCGUY picked this one, he know what he is doing and apparently know what is best for me hehe. They do help a lot with my accelerations, now I do not have to place my feet further on the pedals I can stand in optimal (for me) position at all times, they are so much better than Gotway came up with for sure. Regarding the mudflap, that too is great but I feel it is taken to the extreme, smallest possible without getting my back wet but I had 1 or 2 complaints from behind and if hanging over a lot turning I can sense the drops at the side, again on my hands cause move a lot when riding fast and using gravity. Perfect for mobility and keeping in my backpack at all times but if EUCGUY is willing to and later experiment further I wish he made a secondary variant that cover a little bit more, extend just slightly further? Alternative the other style of mudflap that that extent downwards to make it look like a integrated part of the wheel, like a covered wheel a'la ACM but I am speculating and it is working like intended, I'm just being demanding hehe Link to comment Share on other sites More sharing options...
Electroman Posted September 23, 2018 Share Posted September 23, 2018 Ohh forgot, thanks you Mattias for choosing the higher quality 3m variant, 468MP and not the 9448A variant that is so common on Ebay etc, don't think that one bite nearly as good to the surface. Link to comment Share on other sites More sharing options...
EUCGUY Posted September 23, 2018 Share Posted September 23, 2018 1 hour ago, Electroman said: Ohh forgot, thanks you Mattias for choosing the higher quality 3m variant, 468MP and not the 9448A variant that is so common on Ebay etc, don't think that one bite nearly as good to the surface. I just made a new style flap. See more photos on my site. ? Also, glad to hear that you went through the adaptation phase before you shared the option on them. https://www.eucguy.com/product-page/msx-wide-mudflap Link to comment Share on other sites More sharing options...
Electroman Posted September 23, 2018 Share Posted September 23, 2018 2 hours ago, EUC GUY said: I just made a new style flap. See more photos on my site. ? Also, glad to hear that you went through the adaptation phase before you shared the option on them. https://www.eucguy.com/product-page/msx-wide-mudflap Yes me to, I have learned that how I experience something, feel about it often change with a bit of time regarding these wheels and there seams to always be a slight periods of getting used to it. Slightest change have such an impact it's really needed, of course I also understand you did not just Lego something together and start selling it but rather base your business model on passion for these wheels and take your time testing out what will work well. Thank you, I will most def try the new mudflap as well, it's great to see you keep searching for perfection and make these products available for us, and that at a price that seams to get close to or even beat Gotway's own stuff from Ali which is just amazing! Link to comment Share on other sites More sharing options...
Scooter Man Fran Posted September 27, 2018 Share Posted September 27, 2018 Not a day more then a week and I’m in Florida ! Happy customer here Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.