Search the Community
Showing results for tags 'sensor'.
Found 4 results
So I see that the new 18L model has a sensor system that keeps the wheel from rotating when the unit is lifted off the ground while the wheel is powered on, somewhat like the Inmotion V8, except no button under the handle as in the V8. The 18L just senses that the wheel has been lifted off the ground.........I am curious for more detailed information on this system, and my biggest question is what would keep the wheel from shutting off wheel rotation if a rider caught some air off a bump or doing a small jump? I am sure the system would handle this issue, but not sure how it works in this regard. Anyone have any further in-depth information on this new sensor system?
Hi all, Yesterday night I got my long waited MSuper V3S+ 1300Wh, after taking it out of the box eager to go for a ride, nothing happen... extra loud beeping noise and no balance and sometimes stuttering. Here is the video of what is going on https://drive.google.com/file/d/0B8xmWEYihcQtbGpRc2xUaUZubjQ/view?usp=sharing Your advises and tips will be very welcome. Thank you
So my legway needed repair as it wasn't starting So i ordered a new controller from aliexpress Connected it and was excited but no Legway is not starting I tried calibrating by shorting the two points It only beeps And then a never ending long beep I noticed one thing when connect the 3 phase wires with transparent green caps The motor doesnt rotate freely with or without battery When i remove that the rotor moves freely manually The beep never ends Also two days back sane connections legway had stabilized but didnt move when tilted and stopped again immediately and since then only beeps This is the video showing problem https://youtu.be/NG95tXu8BFc P.S This isn't the original legway motherboard.i dont even know the hall wires connections But one good electronics person told me the red and black are proper And i did try combinations for other 3 Pls help PLS SEE THE VIDEO AND HELP ASAP