Search the Community
Showing results for tags 'plus'.
Found 3 results
Firmware Issue 1.1.6 WARNING, NOT SAFE! CUT OFF if feet leave fotplates (see Yourube videos at bottom) Here is the list so far, PLEASE if anyone can do the "footplate test" (as on first video) on mainboard 1.1.7 and report if issue is solved. I would like to update mostly for the BMS, but I dont dare if the unsafe behaviour is still there. Lift vehicle while pressing on foot plate, wheels should spin as its lifted. Then release foot plate pressure. Wheels SHOULD free wheel to a stop - NOT STOP INSTANTLY by breaking like in 1.1.6 video. FW marked with * is the one I have now and includes my comments, other FW comments are from FW update screen *mainboard 1.0.8 - GOOD/SAFE, no cutoff if foot removed with wheels spinning (when off ground) - PROBLEM, adjusting steering sensitivity and ride sensitivity during an active ride, sent mine into steering freak mode and after stopping it was locked into left turn (constant turning). Turn back to "auto mode" again at standstill - problem solved, Now it can once again be set manually for sharper control (or softer if one likes that) - PROBLEM, tiltback and alarm at 19km/h in app - PROBLEM, 19-20km/h in app = 16km/h real speed (GPS show 16 when pushing it constantly) mainboard 1.1.6 WARNING, NOT SAFE! CUT OFF if feet leave fotplates (see videos below) mainboard 1.1.7 Optimized uplsope performance Optimized alarm in slope Other small known bugs MY WARNING - UNKNOWN IF SAFETY ISSUE FROM 1.1.6 IS RESOLVED *BLE 1.0.0 Ocasinal problems at "search again" (Huawei P8) BLE 1.0.1 IOS11 bluetooth connection fix *BMS 1.1.8 No known/noted yet BMS 1.2.0 Optimized cell balance function *Co-control 1.0.6 A bit confused when starting "not facing" remote Co-control 1.1.4 New function: - Optimized follow me performance *Follow 1.0.0 None noted, see co-control 1.0.6 Follow 1.0.X NO UPDATE AVAILABLE (have it been included in co-control in latest FW?) *Remote 1.0.3 None noted, remote and phone both work fine to remote control Remote 1.0.4 New function: - Fix that remote sometimes cant be charged - Optimize indication of remote control battery volume (level?) Gimbal N/A (dont have one) Likely this one also suffers from 1.1.6 FAST FORWARD to 00:20 for crash
I have only ridden my plus maybe 5-10 times ouside and allready my "trunk" (as indicated on the small compartment) has fallen off, forcing me to drive back and look for it. Luckily i have found it both times in one piece and in both cases my remote was in the trunk, lickily the rubbery band still held it in place both times...pure luck :-) So today i thought i would disassemble and look for improvements. 1.I removed the two screws holding the latch 2. Took out the latch mechanism and found a rubber boot over the pin that is pushed by the button (preventing dust from outside i Guess), but the boot was a bit damaged/deformed due to the construction and maybe a assembly error. 3. Removed the lid on the small mechanism and found a spring loaded latch that looks like this when taken apart. GodGood thing the important parts are in metal. 4. Bad part...no grease or lubricant was present so I added some PTFE spray on the surfaces of the metallic latch and a very thin layer on the plastic push button (drying of residues) and resembled everything. When assembling the latch assembly on the final position (compartment lid) i made sure to push the mechanism as far up (toward edge of compartment) as possible to make the latch catch as deep as possible, before tightening the screws holding it in place. 5. It seemed to do the trick, because now i can push the lid into place without having to push the button (before it got "stuck" forcing me to push the button to fit it). That makes it a lot easier to hear the click when it locks into place. Maybe it have not done that properly before and thus fallen off. Its a very tight fit and even just the remote string can prevent it from locking properly. So make sure to always pull a bit on the compartment after locking to make sure it is properly latched (or you might end up loosing it and whatever is inside) If you don't want to go through the hastle of disassembly and just want to lubricate, it would have the biggest effect doing this on the latch pin, spray close to the plastic walls of the latch. Then also press down the button and give a short spray between button and chassis walls and wipe of residues.make sure to use palstic friendly spray like ptfe or silicone. I don't know how well the plastic handles mineral based sprays lile wd40 or 5-56 which is the equivalent in Europe. You can also loosen the two screws holding the latch and press it toward the edge (there is some hole play that allows a tiny bit of adjustment) and tighten it but make sure not to overtighten since that will break the plastic threads. Of course you do everything on your own risk
edit 16/11/2017 PRICE: The Mini PLUS is sold in China for 3499 元 that is 448 euros / 528 dollars Gearbest sells 455 euros / 529 dollars with no shipping or customs fees It's really the best price we can find The Order: I get my Mini PLUS with Gearbest The purchase was done without problem, I paid with Paypal, I enabled the return support option, I also took out insurance on my order (for the equivalent of 5 euros) The package was sent five days after the order. The first tracking number (track order 1) was only active after one week on the Chinese carrier's website. The invoice is available in PDF in the client interface. Shipping costs are free How will the package travel? 1 / it is sent from the seller to the Chinese carrier located at the beginning of the China Europe rail freight line 2 / the Chinese carrier will put it in a container . The container will be placed on a rail freight car 3 / the train that connects China to Europe will travel 10,000 km, in two weeks, crossing Kazhakstan, Russia, Belarus, Poland. 4 / Arrived in Poland, the package is supported by a Chinese carrier which entrusts it to a European carrier 5 / This transition will take a week or two because there are tons of goods to dispatcher 6/ From the time where a European carrier in Poland take charge of the package, until delivery to your home, it takes five days It is from Poland that the tracking number 2 (track order 2) is edited The parcel was delivered to me by UPS. The package was in good condition. It is very heavy: 20kg Unpacked: Assembling The steering cover must be correctly and carefully laid, pressed, nothing should exceed engaged plastic level, to remove it takes long nails Activation: Is done using an account that you have already created on the application, with an email, a name. Launch the application by connecting to it, update the firmware in "VEHICLE SETTINGS", click on "ACTIVATE THE DEVICE", enter USER NAME / REAL NAME / EMAIL, accept the conditions, refuse the proposed insurance (only for customers Chinese), finally the message "ACTIVATION COMPLETED" appears. You can switch to tutorials: follow them for driving and using the remote control. Once completed, you will have a final message on the complete activation, you must travel 1 km at the speed limit of 10km / h, once reached, you can unlock the mode "LIMIT OFF". Driving & speed: it goes more than 19kmh in speed! Obstacle clearances are simpler, the range is very good, even with low temperatures, the technology is really improved since Mini Pro & Mini models. The mode "Follow Me" is great! The remote control to a fabulous joystick for the "REMOTE MODE" The Mini Plus is really beautiful, the aesthetics is very nice The multilingual user manual in FR-EN-DU-IT-SP is available here https://mini-j.jimdo.com/wikimini/user-s-manual/ MODE FOLLOW ME: With the remote control, be careful not to swing when walking, do not put it in the pocket, let discover the top of the remote. Useful? Yes, in some cases, walk in the forest, or slippery terrain for the ride. Protections: I chose as my previous Mini, 3M adhesive silicone protections Billat designed for car mirrors. They absorb shock well. Of course, you can choose to buy the bumper dedicated to Mini PLUS AliExpress.com Product - Collision stainless steel frame Bumper for Xiaomi Xiaomi Scooter Mini Plus Hoverboard accesaries and Xiaomi kickstand AliExpress.com Product - Mini PLUS Xiaomi scooter Protection Protective Frame Bar Parking Stand Front Rear Bumper for Self Balancing Scooter Mini PLUS The bumpers in black and transparent silicone on my Mini The transparent silicone bumpers on my Mini PLUS On the edge of the chest, bonding is not total, it could come off, do regular pressure from right to left, so that the sticky surface adheres to the maximum. Preventing air leaks and punctures: When using the Mini, the tire can leak air under the effect of weight and terrain The tire is found deflated and we find no traces of punctures Using liquid silicone, it will "glue" the tire to the rim It will surely wait for the next shock will leave exhausts air and inflate again the tire to the correct pressure, so that the liquid "glue" the tire to the rim, hardening And in case of puncture, the liquid silicone hardens on contact with air Mini PLUS is equipped with a valve Presta, unscrew using a disassembled shell Once the air has escaped, plan half a bottle of Zeafal Sealant Press the tire and release to aspirate the fluid Clean the valve with a cotton swab Screw the shell back, inflate to pressure 3.1 bar-45PSI Keep the box and use the base ...