Search the Community
Showing results for tags 'es1'.
Found 5 results
-
Hi Guys. I need some help. My Segway ES1 won’t turn on. Long story short... I installed my extended battery( worked perfectly) but when I was riding it and hit a bump the external battery fell off which caused my scooter to turn off. My external battery fell to the ground but still works. I don’t know why it won’t turn on. I plugged in my charger and it wouldn’t charge. I tested for DC voltage and I would get 0 VDC. Is it replaceable? And how can I access the internal battery? please help. I really appreciate it. Thank you
-
Hoping someone might be able to chime in on what Ninebot/Segway uses for the BMS. I have a es1 with the dual battery setup however I would like to add extra power for range. via craigslist i bought two broken es1 and the battery packs look fine, voltage was putting out 35 on both packs however the 4pin which i thought was balancing leads dont put out anything on the multi-meter. Off the top of my head I was thinking just pop them in parallel and somehow disable regen but... since I dont know the BMS or how to tap into it i held off. open to ideas =) thanks!
-
Hi, Yesterday my ES2 started to feel wierd. It all happened when going downwill and started to brake. Immediately after applied the electric brake, the scooter turned off and I lost control of it while going downwill! Luckily I had a uphill on a left corner and no cars were there on the moment. After stop, clicked to turn it on and all seems fine. But not when riding, acceleration was slow and when using the electric brake, the drive hub started giving some crackling sounds. I was on sport mode. While riding home, lost acceleration and electrical braking. Although, the scooter turn o
-
Below, official internal pictures (bluetooth chips, processor, battery) , external pictures, lab tests from FCC ES4= ES2+external battery This could help you if someday you need purchase ones parts and be sure you are ordering for an original part
-
Hello, first of all, thank you for the forum. Recently my ninebot segway es1 stopped working, it is necessary to change the "motherboard". The one inside the tube. I can not send it to repair the official service. I have looked at this piece online, I have found it relatively cheap. But I read that if I change the motherboard myself, I will get error 35 and I will not be able to activate it. Somebody could help me ? Thank https://s.click.aliexpress.com/e/YHVNzhI
