Jump to content

Shield

Full Members
  • Content Count

    156
  • Joined

  • Last visited

Everything posted by Shield

  1. All after market lights will have loose wiring and will need to have a 3.5mm jack installed in order for them to work with the Sherman. I dismantled my origunal light desoldered the wires from the board and resoldered them on the new light. Black wire is ground (-) the red wire is hot (+) and used for the main lights, yellow or white is hot (+) and used for the side lights. Sorry for any confusion. The box on my light also only showed those colors but the actual light had amber side shooters.
  2. I don't see why you couldn't use the second light since it runs on 6-12v DC. The first one listed requires 24-60v DC the Sherman only puts out 12v.
  3. Wow! Loving the look of this S18 cover from Roll.nz! https://www.roll.nz/int/euc-bodyguard/93-320-ks-s18-euc-bodyguard.html#/131-colour_combination-black_sides_shocking_pink_edges
  4. Thank you for the kind words. 👍🏻 By the way check out Vaughn Skow pickups. His pups sound amazing in my PRS. https://www.vaughnskow.com
  5. Preproduction models had Blue side shooter lights, first batch had Red side shooter lights. I'm not sure what they are shipping with now but I purchased this Amber version myself from Aliexpress. https://www.aliexpress.com/item/1005001316625876.html?spm=a2g0s.9042311.0.0.27424c4dDkj5sI
  6. I agree and it does seem like Gotway is tweaking things. When I contacted eWheels about the EX and asked for a shipping ETA this is what they had to say... "Joe, We don't have a definitive date on the EX (Gotway is making some last-minute adjustments to the Wheel before full production). As soon as we know, it will be up on the site for *official* preorder."
  7. Just put in my pre-order, really looking forward to the EX.
  8. https://www.aliexpress.com/item/33002726011.html?spm=a2g0s.9042311.0.0.34d54c4d87Hsdy
  9. Just wanted to throw this out there for anyone looking for replacement charge port caps. The 'screw on' type do have a rubber seal inside to keep the moisture out. Plus when you screw it down it butts up against the back ring so it's almost like dual protection. I got these on Ali but you can find them on eBay as well.
  10. First thing I did was put the pads on and took a ride around the block. Second thing I did was yank them off as soon as I got back home. I much prefer to ride without the bulky pads but I did but some rubber bumper grip from Amazon and cut it to fit. It doesn't add any width and makes the sides more grippy. https://www.amazon.com/gp/product/B0814LX1QX/ref=ppx_yo_dt_b_asin_title_o04_s00?ie=UTF8&psc=1
  11. Seemed more like a EX Dissuade video than an Initial Review.
  12. Found these on Aliexpress, may give the screw on ones a try. https://www.aliexpress.com/item/33002726011.html?spm=a2g0o.detail.0.0.7a157eebYQNLIZ&gps-id=pcDetailCartBuyAlsoBuy&scm=1007.12908.187669.0&scm_id=1007.12908.187669.0&scm-url=1007.12908.187669.0&pvid=fea7ce91-1786-42fa-9760-bbc19c41a5d9&_t=gps-id:pcDetailCartBuyAlsoBuy,scm-url:1007.12908.187669.0,pvid:fea7ce91-1786-42fa-9760-bbc19c41a5d9,tpp_buckets:668%230%23131923%2367_668%23808%233772%23231_668%23888%233325%2319_668%232846%238111%23466_668%232717%237564%23665__668%233374%2315176%23936
  13. I've tried 15, 20, 25 and 30psi and I like 30psi the best. May even try 35psi and see how it goes.
  14. New seat called "The Dogbone" with slightly raised ends.
  15. So far so good, much better than the official Veteran seat. The clamps I used are not as tight as I wanted. If I lean too hard there is some side to side slipping. I've ordered new clamps which have a tighter grip, https://www.aliexpress.com/item/33036829418.html?spm=a2g0s.9042311.0.0.4c4a4c4dZaf2Hb
  16. Made my own one-off velocity seat for the Sherman. Already had the wood and the foam insert. Got the cover from Amazon and the rail clamps from Aliexpress. Links for those are below. https://www.amazon.com/gp/product/B07HQQVYL7/ref=ppx_yo_dt_b_asin_title_o05_s00?ie=UTF8&psc=1 https://www.aliexpress.com/item/4001165093264.html?spm=a2g0s.9042311.0.0.4b284c4dTrLkRs
  17. I had a similar issue with my tire. I did what you originally did and first let the air out and squeezed around the tire trying to reseat it. Then I got on the wheel (still flat) and rolled it forward and back. Once I refilled it with air it was perfectly straight. Hope this helps.
  18. Congrats on getting your wheel up and running. There is nothing like that first ride on a new wheel. The Sherman has really brought back that feeling of why I love EUC's so much. If I had to describe the Sherman in one word it would definitely be "exhilarating".
  19. If anyone is interested in getting stainless steel screws or replacing the Phillips head with Hex head screws the Sherman screws are as follows. Shell Cover - M4x18mm Countersunk Scews (9 on each side, 18 total) LCD Cover - M3x10mm Countersunk Screws (2 on each side, 4 total)
  20. Hard/Strong mode makes my feet and legs hurt. It's like trying to do the Michael Jackson lean and holding it there. I prefer soft mode, not just for comfort but I feel more incontrol.
  21. I came across this decal for sale on Etsy and somehow that silhouette looks oddly familiar!?
×
×
  • Create New...