Jump to content

Sebrios

Full Members
  • Content Count

    68
  • Joined

  • Last visited

Everything posted by Sebrios

  1. Im like 80% sure you can connect all the system to the usb port. As I mentioned before, I was going to do it, but then I saw that the 9V battery still has 9 solid V's so decided to leave it as is. Super super happy with the mod. For some reason, after reading some posts here, I thought I wasn't hearing the beeps some times (40mph and no beeps) so what I did is that I turned the Alarm 1 and 2 back on, and took a fast run.. That made the buzzers sound all the time.. When I came back, I saw my top speed at around 39.5 and never stopped hearing the beeps.. Which confirmed to me that mod works like a charm 💪💪 with single buzzer I wouldn't hear anything
  2. I remember last month or 2 I sagged the battery down to 5% @38mph... that scared the s t out of me after I checked my phone. By the time, I didnt have the beeper mod, so I didnt hear anything, and eucW didnt alarm me anything.. thats why Im still looking for good warning solution...
  3. Im running a msx100V Im pushing it hard so that I sag the voltage as much as possible (just to understand.. Its not my regular riding habit) but I've found that even when I force it to go below 10% it won't beep. In the other hand, im sure the 80% alarm is NOT controlled by speed only... Oh, I am super light too. 57kg with all my gear on (that's like 118lbs) when battery is very low, and you push it, it does beep
  4. Hello guys. Just wondering if you have experience with this: I would like to know how low does the voltage must sag down in order to trigger the 80% alarm. Today I started running at 50%, sagged it down (according to eucW) to 10% but the alarm didn't trigger. I didn't fall or anything.. But I was trying to understand a bit how its triggered... I was hoping to hear the alarm at 20%, but didn't. Then I activated the alarm 1 and 2 to see if they were still working, and they do just fine. Then, deactivated both again, did a lift test, and it works too...
  5. awesome response. Thanx again for taking the time to read all about EUCW
  6. Hey guys, and I believe @Seba (Hopefully) First of all, Seba, THANK YOUUU for this wonderful app!!! I've been trying to set the EUC World Alarms in quite a lot different forms. However, sometimes they trigger, but some times they dont. If you want to be sure it works, you MUST choose a high Battery status. for Example Speed >64kmh && Battery <100% this will work like a charm. However, if you set Speed >35kmh && Battery <15% here is what I find: If I reach 35kmh when battery <15% it triggers. but if the battery is higher, and then drops, it wont trigger... you lost the chance of triggering it. So what I believe its happening, is that the software checks for speed AND battery at the same time: If (Wheel_Speed >= Speed_alarm1) && (Wheel_battery <= Battery_alarm1) then trigger.alarm what if you do it seppared? If Wheel_battery <= Battery_alarm1 then if Wheel_Speeed >= Speed_alarm1 then trigger.alarm if you do it this way, we can have an alarm every time the voltage sags while ridding at certain speed... this is just assuming... I have no ideaaaa how this works Any ideas? Thanx again!!!!!
  7. Today it's been about a month or 2 of almost everyday ride, and lots of beeping... decided to open up the wheel again to check the battery! Still solid 9V there An average 9V battery has 300Wh/h ... if you use 4 buzzers @ 30mA each, you have 10 hours of CONSTANT beeping. thats ALOTTT considering every second you hear the beeps, it only takes 0.2secs of actual beeping.. ... (10*60)/0.2secs = 3.000 beeps so changing the battery every...6months or so, should be more than enough to tell you the truth, I was concerned about this issue aswell, so my plan today, was to use the USB.. but after noting how it has worked, I decided just to leave it as is... and works like a charm! you should try it,.. worse case scenario, you will remain with stock beep, as its not affected by this design... or use a 6pack AA batteries, that will last for....ever! lol... each one is rated I believe 2.300mA*6 ....
  8. Boooooo Video If you're not willing to pay full price, and you do everything you can to save some dollars, be prepared to take care of your own. You expected to have same service as if bought from a distributor? .. thats why they have a margin... to keep parts and support their customers. if you want to be cheap, at least be prepared to pay for the spare parts booooooooo!!!!! (sorry guys, this comment is how I think about the OP. no intend to offend anyone here)
  9. wow, 20 miles and still 42% is a lot! I bet you didnt push it that hard. I normally sag the voltage down to 10% (a few times down to 5%) ... i know i know... I regret doing it...every time but, do you think 40miles with normal use for a 1230W is fine? and just 7 miles (With 40% left) when pushing it?
  10. https://www.youtube.com/user/ZenLeeGaming he uses a Nik+ for what you want
  11. mmm yeah. thats true... but I guess you reduce speed as the beeps comes. I think riding style affects soooooo much the range... I can get about 35-40miles with easy ridding. (is this normal?) But Today I had a rough ride, and went from 100% to 40% in just under 6-7miles???? im 60Kg geared up (enthusiast cyclist here )
  12. hey guys, I've been looking for MIN range tests for the Msx (Specially the 1230W that I have) have you done, or know any video? I would love to see. Min range = drain battery riding at the highest speed possible
  13. You can use a Y cable and connect it to the board... that way you dont loose the outer usb
  14. I did add some extra buzzers, as I ride the wheel at its limit all the time, and couldn't hear the beeps.. When I did the mod, I didn't have the tools to split the usb cable and take current from there. My solution was adding a 9V battery, but should last at least 6months or more. Take a look Buzzers mod you can use the usb instead of the 9V
  15. you need to activate the voice comands in EUCW. its on the upper part of the screen... next to the 3 vertical dots. if you dissabled 1st and 2nd alarm, the wheel only beep at 80% ussage of battery.. thats around 35mph for the msx while lifted (somewhere around... cant remember exact speed)
  16. attached the list of components ready to buy at jameco site (the only I know in the us) im sure you can get everything cheaper... but if you want ease, this is the way cart.csv
  17. The output current of the boards buzzer plug is very limited. Its not strong enough to turn 2 buzzers on. I believe its like 40mA output. That's why you need a circuit like this. You can use the usb output instead of the 9V battery. But when I did the mod, I didn't have voltimeter, nor extra cable to divide the usb cable wire.
  18. Normally open button. when pressed, the circuit is closed
  19. hey guys, many have asked me how I moded my wheel to have actual useful buzzers. well, I added 4 extra ones Here, im sharing with you the SUPER SIMPLE and CHEAP (Like USD8) way to do it. (The diagram shows only 2 buzzers, but keep in mind you can add up to 5 items (I'd rather only add 4 thou) you can choose buzzers, or a laser pointer like the mss, a mix of those... makes no difference.) the sound coming from my wheel went from 54db to 74db standing on it, and having the phone to measure at my heads height ohh... forgot to say: where it says From Original buzzer, You can leave the stock one!... so total is 4(or5)+1. you just cut the wire, and get the signal from there also, attached a pic. of the actual circuit so you can have an idea how simple it is. components list: 1-4 buzzers/pointer 1 Diode 1N4001 1 transistor: 2N2222A (or without the A... its the same) 1 breadboard 1 9V Battery and holder 1 resistor: 4.7K Ohm 1 Resistor 330 Ohm Optional: 1 dip switch to activate/deactivate each component let me know if you have any questions:
  20. Thanx @Lindsey looking for shorter ones, as I have to put them on/off several times a day, and put them in a small backpack while i am with customers. Normally I store everything in a small Decathlon 10L bag
  21. hey guys, look what I found. they look awesome... would love to hear your thoughts before pulling the trigger 100% Fortis Knee Pads also Ion K-Pact Zip
  22. Sebrios

    MSS vs MSP

    this is exactly what I think aswell. for me, they just included more batteries, so the 80% edge is further (faster speed) that, with the combination of the msx (2000W) motor, is nuts
  23. its all about the enabled alarms. if you only want the final 80% alarm, then you have to dissable 1 and 2 alarms
  24. Install a lift button. Thank me later All info and video here
  25. I would get a smaller euc. The msx may be to bulky to carry around. Maybe a mcm5 for you would be awesome. I have several bikes, but if its only by convenience, I use the euc. You can get everywhere, and just keep it at your side
×
×
  • Create New...